So this is what I'm going to be flashing in this tutorial ok? So I'm going to wait for the NCK box Qualcomm module dashboard to come up. Now, in my case I have the QCN backup right here, this is it right here, I ready backed it up.

So once you have all these in place, what you'll want to do is to launch the NCK box Qualcomm module and wait for it to come up. You're going to need the phone of course.You are going to need to have installed ADB and also enabled USB debugging on the phone.You'd also need to install the NCK box Qualcomm module, we have a guide on how to do that. You are going to need to have rooted the phone. The things you're going to need for this guide are the box of course, you're going to need to have set it up. If you have a working phone, we have a guide on how to extract it from the working phone so just check out that guide but if you already backed it up, this guide will show you how to flash your QCN using NCK box Qualcomm module. QCN manages your IMEI and other NV items like Baseband and the rest so in a case where you find out that your phone can't detect SIM (network) maybe after you flash a custom ROM after you make some modification on your phone and you cannot detect SIM card, you don't have IMEI or you have invalid baseband, you are going to need the QCN of the phone by either flashing it from your backup or extracting it from a working phone. Quote:In this video tutorial, I'll be explaining how to restore or flash QCN to a Qualcomm Android phone. Avoid restoring a QCN which isn't for your phone model and backup yours first just in case something goes wrong.If you use the loader version (no hardware needed) then your antivirus might give a warning.

Should you install and run the module without the hardware box, it won't work

NCK Pro Box requires a hardware box to function.

You should get a Done message once QCN restore is complete.

The tool should start restoring the QCN, do not interrupt.

In the Window that pops up, navigate to the location of the QCN file, highlight it then click Open.

Back in NCK Box, click the IMEI-QCN tab.

Check Device Manager to confirm that Diagnostic Mode has been enabled (Qualcomm HS-USB Android DIAG 901D).

Connect the phone to the box (while powered on) then click Enable Diag.

Nckbox qualcomm module 0.12.4